WEC200-00 Wiegand-to-Ethernet Controllers
- Product Code: WEC200-00
- Availability: In Stock
WEC200 is a compact networkable access controller that can be fitted to one door access. It features the interface conversion from Wiegand to Ethernet, which allows WEC200 being able to connect to any kind of Wiegand reader, such as magnetic stripe reader, RFID reader or fingerprint reader. With the networkable access, it gives the advantages of central control,and easily viewing the event log reports.
2K memory capacity, maximum can store 50 users, 10 visitors and 20 times log ( Standalone mode). Also available for Online mode.
Provide master card for appending or deleting visitor authority from external reader directly.
Feature 2 input sensors for the detection of door unlocked and exit button pressed.
Provide 2 relay outputs for external alarm and electric lock.
Door left open alarm function.
Separate control unit and reader for higher security demand
With Ethernet connection to PC and able to work independently at off line with PC.
Provide 1 holiday table with up to 10 dates defined.
Provide 3 time zones.
Provide setting for length reading and checking of card numbers.
Control unit is programmable, which is able to meet your commercial logic need, such as facility management or In/Out control.
Communication One Wiegand port. One 10/100 BaseT Ethernet Port
Available Wiegand format: 26, 30, 34, 35, 37, 38, 42 bits
Power consumption: 140mA 12VDC
Protocols: Communicates with server on the networking using TCP or UDP protocols
Indication type: Three LEDs display status information, One built in buzzer2 sets of input, 2 sets relay output (including N.C/ N O, Common)
Dimension: 100 x 96.8 x 24.35 mm
Operating Temp: 0-55 Deg C
Storage Temp: -10 – 55 Deg C
Humidity: 10-90% relative
Note: The Specification is subject to change without notice.n