|
| Product Name Mifare® RFID Reader Model No. MF7 Download Catalog Picture |
Introduction The MF7 is a very high performance proximity reader. This well-designed reader is packed with technical features that have medium range capability and a small footprint. The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range. The MF7 reader also comes with a variety of Three-In-One interface, RS-232, MSR ABA TK2 and Wiegand interfaces allowing it to integrate with a variety of applications, especially security access control.
Features * Reading distance: up to 50mm * Frequency: 13.56 MHz * Read Mifare UltraLight and MF1 Standard cards * Three -In -One interface, with Wiegand, MSR ABA TK2 and RS232 interfaces * Fast data transfer * Weather resistant * High data integrity * User convenience * Easy to install * Available to install on metal surface
Specifications Electrical Power Requirements:5~18 Volts regulated DC at 200 mA typical. A linear regulator is recommended. Interface: Wiegand MSR ABA Track 2 RS232 Or special customized specifications. Interface Cable - 90 cm Reads Mifare MF1 standard cards for 1024/4096 byte and Mifare Ultralight cards of EEPROM size 512bit for ISO 14443A and Mifare DESFire. Typical Maximum reading distance:Up to 50mm at 5~12V with Mifare card in ideal conditions. Operating frequency: 13.56MHz standard Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type External control Audio / Visual Indication: Internal LED and Buzzer
Mechanical Dimensions: 83 (L) x 47 (W)x 16(H) mm Housing material: ABS
Environmental Operating temperature Range: -10 to 60 Deg C. Operating relative Humidity: 10 ~ 90%.
Mifare is a registered trademark of Philips Electronics N.V. |
Tags: MF7,
MIFARE,
®,
13.56MHZ,
Reader